Why is there no water going into my washing machine?

Have you been using a washing machine for a while now and have started experiencing some issues? You are not alone. Every user experiences certain problems with this machine at one point.

One of the common issues that some users reveal is water not going into the washing machine. If you can relate, you should find out what is causing this and how you can solve the problem. This can happen due to kinked drain hoses, a problem with the water inlet valve, a faulty water level switch, clogged filters, a blocked pressure chamber, or your water supply. We will discuss each cause and help you figure out what you should do. Enjoy!

Reasons why water is not going into the washer and how to solve it

The water supply is not turned on

When you notice that no water is going into the washer, this is the first thing that you should check. If the water supply is not turned on, no water will flow into the machine. Once you have confirmed that the supply is on, pay attention to the inlet hose. Kinks on the inlet hose can prevent water from reaching the washer. You can easily straighten kinked drain hoses to enhance the flow of water into the washing machine.

The water inlet valve could have a problem

The inlet valve is the part that connects the washer to the hoses. It is an essential part that ensures that the washing machine fills with water and drains it properly. The water inlet valve regulates the amount of cold and hot water that gets into the washing machine.

If the inlet valve has a problem, then water will not go into the washing machine as expected. This can prevent the washing machine from filling sufficiently or make it not fill at all. Since you cannot repair the water inlet valve on your own, consider getting a washing machine repair man. An expert can replace spare parts easily to help you solve this issue so that your washing machine can continue getting enough water supply for cleaning.

Faulty water level switches

A washing machine also contains water level switches. These are important since they regulate the amount of water that flows into the washing machine and prevent it from overfilling. If your washing machine is not filling, the problem could be faulty water level switches. If you suspect that this is the problem, get a qualified machine engineer to help fix this. Such a specialist should have experience in opening up such home appliances.

Clogged filters

Sometimes, water may not go into a washer due to the clogged filters. Inspect the washing machine filters to confirm that they are not clogged up. If you see any clogging in the filters, you can easily clean them to get rid of lint and dust. The manufacturers of washing machines design them such that you will not struggle to access the filters. If the filter is defective, consider replacing it with another one to avoid further problems.

Blocked pressure chamber

The above are not the only causes of water not going into a washing machine. Sometimes, a blocked pressure chamber could be the main cause. When the pressure chamber is blocked, air can easily get trapped. This makes the pressure switch stay on. Confirm this by checking if the washing machine is spinning even when it does not have any water.

Your water supply

Sometimes, there could be no water going into the washer, while other times, it could be moving at a slow pace. If the rate is slower than normal, the problem does not lie in the washing machine. In this case, your water supply is the problem. You can solve this problem with assistance from a plumber.

A summary of the causes and solution

Why water is not going into the washer
What to do
The water supply is turned off
Turn it off
Kinked inlet hose
Straighten it.
A problem with the inlet valve
Get in touch with an expert to help you replace it
Faulty water level switches
A washing machine engineer can help you fix them.
Clogged filters
Clean the filters to eliminate lint and dust in them
Blocked pressure chamber
Confirm if the machine is spinning when there is no water in it.
Slow water supply
A plumber can help

Conclusion

Every washing machine user should take their time to learn different aspects of this home appliance. This can save you from getting frustrated every time you face a problem. If you notice that there is no water going into the washer, try any of the suggestions we have discussed above.

FAQs

How can I clean the filters?

Unplug the washer from the power source. You should then disconnect the hoses at the back. You can now clean the washing machine filters.

How does water get into the washing machine?

The water that is needed for wash and rinse cycles gets into the machine through an inlet valve.

Dennis Vaughn

Dennis Vaughn is a certified plumber and has been offering apprenticeship experiences to most of his employees for the past 12years. Dennis owns and runs an appliance store, and has a team made of different expertise from electricians, appliance repair individuals, and plumbers. According to him dealing with appliances is one thing but the after-sales services are what makes for the loyal clients. Many people don’t know who to call when their appliances break or become faulty, and a good number are not aware of the varieties of appliances in the market tailored to fit their expectations. The above is what necessitated the creation of the extensive excerpts on the washing machine units, which come complete with directions on the simple home repairs.

X